Literature Review: Penerapan Metode Single Minutes Exchange of Die (SMED) di Berbagai Sektor Industri Manufaktur
DOI:
https://doi.org/10.37721/kalibrasi.v6i2.1124Keywords:
Single Minutes Exchange of Die, Set-up, Pergantian, Improvisasi, Industri ManufakturAbstract
Menghadapi keadaan pasar yang semakin kompetitif, berbagai perusahaan di industri manufaktur melakukan berbagai improvisasi untuk melakukan optimalisasi proses produksi. Pertumbuhan inovasi yang cepat telah menyebabkan tingginya persaingan dan variasi produk yang di inginkan. Peningkatan produktivitas dan kualitas barang merupakan suatu hal yang penting dalam merespon antusias dari pelanggan. Perusahaan yang ingin meningkatkan produktivitas adalah dengan mengurangi waktu Set-up mesin, changeover, lead time, dan pembenahan proses produksi dalam suatu industri. Tujuan dalam penelitian ini untuk mengidentifikasi dan menganalisa seberapa jauh penerapan metode Single Minutes Exchange of Die (SMED) di industri manufaktur untuk mempercepat waktu pergantian dies dan set-up mesin. Metode penelitian ini menggunakan Sistematic Literature Review (SLR) dinilai sangat cocok diterapkan pada penelitian ini untuk mengetahui penerapan SMED, dikarenakan dengan banyaknya referensi dapat membantu penelitian lain dalam mengaplikasikannya. Penelitian ini menemukan 41 artikel membahas metode SMED industri manufaktur. Namun setelah dianalisa lebih lanjut ada 6 artikel dengan judul yang sama dan 35 artikel berbeda yang semuanya membahas kegunaan dan fungsi SMED pada industri manufaktur di berbagai sektor. Manfaat dalam penelitian ini dapat meningkatkan hasil produksi pada industri manufaktur seperti efisiensi waktu set-up, menurunkana waktu changeover, dan meningkatkan produktivitas dalam industri manufakturReferences
Arifin, D. (2018). Analisis Perbaikan Waktu Setup Dengan Menggunakan Metode SMED Untuk Meningkatkan Produktivitas PT. Trimitra Chitra Hasta. Jurnal KaLIBRASI -Karya Lintas Ilmu Bidang Rekayasa Arsitektur, Sipil,Industri, 1(1), 1–14. https://doi.org/10.37721/kalibrasi.v8i0.313
Bakumarwa, F. R., & Singgih, M. L. (2021). Pengurangan Waktu Set-up pada High Frequency Welding Perusahaan Manufaktur Pipa Baja dengan Metode SMED. Jurnal Teknik ITS, 10(2), B212–B217.
Basri, A. Q., Mohamed, N., Nelfiyanti, & Y, Y. (2021). SMED Simulation in Optimising the Operating Output of Tandem Press Line in the Automotive Industry using WITNESS Software. International Journal of Automotive and Mechanical Engineering, 18(3). https://doi.org/10.15282/ijame.18.3.2021.05.0682
Creative Safety Supply. (2022). 5S Lean Methodology & Principles [Lean Manufacturing]. https://www.creativesafetysupply.com/content/education-research/5S/index.html
Desai, M., & Rawani, A. M. (2017). Productivity Improvement of Shaping Division of an automobile industry by using single minute exchange of die (SMED) methodology. ARPN Journal of Engineering and Applied Sciences, 12(8), 2615–2629.
Fauzi, A., Galang, R., Kurnia, H., Egga, D., & Usman, M. (2023). Penggunaan Non-Metallic Material di Berbagai Industri Manufaktur Indonesia Secara Tinjauan Literatur Sistematis. Jurnal Kalibrasi, 6(1), 13–21. https://doi.org/10.37721/kalibrasi.v6i1.1123 1.
Ferdian, R. (2021). Design Of Pt Xyz Work Station By Calculating The Standard Time, Single-Minutes Exchange Of Dies (Smed) And 5s Method. Turkish Journal of Computer and Mathematics Education (TURCOMAT), 12(8), 867–873.
Gees. (2012, October 21). SMED (Single Minute Exchange of Dies). TI Universitas Komputer Indonesia.
Godina, R., Pimentel, C., Silva, F. J. G., & Matias, J. C. O. (2018). A structural literature review of the single minute exchange of die: the latest trends. Procedia Manufacturing, 17, 783–790.
Haifa, A. I. (2020). Pengurangan Lead Time Analisa Kemasan Primer Flexy Bag dengan Metode Single Minute Exchange of Dies (SMED) di Industri Farmasi X. Jurnal Inkofar, 1(1), 40-46
Herlambang, H., Ikatrinasari, Z. F., & Kosasih, K. (2022). Single-Digit time: Toward a Quick Change-over Process with The SMED method using The Vision System. Operational Research in Engineering Sciences: Theory and Applications, 5(1), 56–68.
Islami, C. R. S., Kurnia, H., Mawabagja, D., Dananjaya, D., & Subarkah, R. R. (2023). Aplikasi Material Teknik Jenis Non Logam Diberbagai Industri Manufaktur Indonesia Secara Sistematik: Kajian Literatur. Prosiding SAINTEK: Sains Dan Teknologi. Fakultas Teknik, Universitas Pelita Bangsa, 2(1), 343–351.
Jain, S., & Vaishya, R. O. (2021). Case study: application of SMED in SIM card manufacturing company. International Journal of Productivity and Quality Management, 32(1), 109–128.
Jurík, L., Horňáková, N., & Domčeková, V. (2020). The application of smed method in the industrial enterprise. Acta Logistica, 7(4), 269–281.
Karam, A.-A., Liviu, M., Cristina, V., & Radu, H. (2018). The contribution of lean manufacturing tools to changeover time decrease in the pharmaceutical industry. A SMED project. Procedia Manufacturing, 22, 886–892.
Kurnia, H., Setiawan, I., & Hernadewita. (2022). Integrasi Lean dan Green Manufacturing Untuk mengurangi Pemborosan Proses dan Limbah Kertas Rekrutmen Karyawan Pada Industri Manufaktur di Indonesia. Jurnal Rekayasa Sistem Industri, 11(2), 145–156. https://doi.org/https://doi.org/10.26593/jrsi.v11i2.5608
Kusrini, E., & Parmasari, A. N. (2020). Productivity improvement for unit terminal container using lean supply chain management and single minute exchange of dies (SMED): A case study at semarang port in Indonesia. International Journal of Integrated Engineering, 12(1), 122–131.
Lamani, E., Ahmad, A. N. A. bin, & Ahmad, M. F. bin. (2020). Lean manufacturing implementation to reduce waste on weighing scale assembly line. International Journal of Emerging Trends in Engineering Research, 8(1 1.2 Special Issue). https://doi.org/10.30534/ijeter/2020/0781.22020
Lipiak, J. (2017). Methodology for Assessing the Factors Affecting the Quality and Efficiency of Flexographic Printing Process. Procedia Engineering, 182. 403-411. https://doi.org/10.1016/j.proeng.2017.03.122
Lozano, J., Saenz-Diez, J. C., Martinez, E., Jomenez, E., & Blanco, J. (2017). Integration of the SMED for the improvement of the supply chain management of spare parts in the food sector. Agricultural Economics, 63(8), 370–379.
Martins, M., Godina, R., Pimentel, C., Silva, F. J. G., & Matias, J. C. O. (2018). A practical study of the application of SMED to electron-beam machining in automotive industry. Procedia Manufacturing, 17, 647–654.
Monteiro, C., Ferreira, L. P., Fernandes, N. O., Sá, J. C., Ribeiro, M. T., & Silva, F. J. G. (2019). Improving the machining process of the metalworking industry using the lean tool SMED. Procedia Manufacturing, 41, 555–562.
Mulyana, A., & Hasibuan, S. (2017). Implementasi single minute exchange of dies (SMED) untuk optimasi waktu changeover model pada produksi panel telekomunikasi. Sinergi, 21(2), 107–114.
Neraca. (2019, August 26). Kemenperin: Industri Manufaktur Terus Didorong untuk Perbanyak Terobosan. Berita Industri. https://kemenperin.go.id/artikel/20985/Industri-Manufaktur-Terus-Didorong-untuk-Perbanyak-Terobosan
OEEsystems. (2022). Reduce Changeover Times in Manufacturing | OEEsystems. https://www.oeesystems.com/reduce-changeover-times/
Rasib, A. H. A., Ebrahim, Z., Abdullah, R., & Rafaai, Z. F. M. (2019). Improvement of Overall Equipment Effectiveness through Application of Single-Minute Exchange of Die in Automotive Manufacturing,”. Test Engineering and Management, 81(3650), 3650–3659.
Rawal, M. R., Kanitkar, S. G., Sasane, A. A., Sabale, S. S., Kasbekar, P. v, & Bhopale, D. P. (2021). Process Design & Development Using Smed Concept-A Case Study. Journal of the University of Shanghai for Science and Technology, 23(12), 20-35
Ribeiro, M. A. S., Santos, A. C. O., de Amorim, G. da F., de Oliveira, C. H., da Silva Braga, R. A., & Netto, R. S. (2022). Analysis of the Implementation of the Single Minute Exchange of Die Methodology in an Agroindustry through Action Research. Machines, 10(5), 287.
Ribeiro, P., Sá, J. C., Ferreira, L. P., Silva, F. J. G., Pereira, M. T., & Santos, G. (2019). The impact of the application of lean tools for improvement of process in a plastic company: A case study. Procedia Manufacturing, 38. https://doi.org/10.1016/j.promfg.2020.01.104
Ribeiro, R. B., Souza, J. de, Beluco, A., Biehl, L. V., Braz Medeiros, J. L., Sporket, F., Rossini, E. G., & Amaral, F. A. D. do. (2019). Application of the single-minute exchange of die system to the CNC sector of a shoe mold company. Cogent Engineering, 6(1), 1606376.
Sabale, A., & Nagare, M. R. (2017). SMED (Single Minute Exchange of Die) Methodology in Powder Coating Manufacturing Industry–Case Study in reducing Change over time. Journal Homepage: Www. Ijrpr. Com ISSN, 2582, 7421.
Şahin, R., & Kologlu, A. (2022). A Case Study on Reducing Set-up Time Using SMED on a Turning Line. Gazi University Journal of Science, 35(1), 60-71. . https://doi.org/10.35378/gujs.735969
Setiawan, B., Setiawan, I., Kurnia, H., Wahid, M., & Purba, H. H. (2022). Implementasi Metode Value Stream Mapping Pada Industri: Tinjauan Literatur Sistematis. Inaque : Journal of Industrial and Quality Engineering, 10(2), 103–116. https://doi.org/10.34010/iqe.v10i2.5989
Setyawan, L. (2018). Peningkatan Cycle TIME Proses Mesin Drawing Tembaga Dengan Metodologi Smed Pada Industri Kabel Di Tangerang. Penelitian Dan Aplikasi Sistem Dan Teknik Industri, 12(2), 328383.
Silva, A., Sá, J. C., Santos, G., Silva, F. J. G., Ferreira, L. P., & Pereira, M. T. (2020). Implementation of SMED in a cutting line. Procedia Manufacturing, 51, 1355–1362.
Sousa, E., Silva, F. J. G., Ferreira, L. P., Pereira, M. T., Gouveia, R., & Silva, R. P. (2018). Applying SMED methodology in cork stoppers production. Procedia Manufacturing, 17, 611–622.
Steven, E., Chin, J., & Nadlifatin, R. (2022). Implementation of Lead Time Improvement in the Cutting Production Process using Clustering Data Mining and Lean Manufacturing. KnE Social Sciences, 382–391.
Stuglik, J., Gródek-Szostak, Z., & Kajrunajtys, D. (2019). The use of the SMED method in the improvement of production enterprises. E3S Web of Conferences, 132. https://doi.org/10.1051/e3sconf/201913201022
Sugarindra, M., Ikhwan, M., & Suryoputro, M. R. (2019). Single Minute Exchange of Dies as the Solution on Set-up Processes Optimization by Decreasing Changeover Time, A Case Study in Automotive Part Industry. IOP Conference Series: Materials Science and Engineering, 598(1). https://doi.org/10.1088/1757-899X/598/1/012026
Vieira, A. M., Silva, F. J. G., Campilho, R. D. S. G., Ferreira, L. P., Sá, J. C., & Pereira, T. (2020). SMED methodology applied to the deep drawing process in the automotive industry. Procedia Manufacturing, 51. https://doi.org/10.1016/j.promfg.2020.10.197
Vieira, T., Sá, J. C., Lopes, M. P., Santos, G., Félix, M. J., Ferreira, L. P., Silva, F. J. G., & Pereira, M. T. (2019). Optimization of the cold profiling process through SMED. Procedia Manufacturing, 38, 892–899.
Wang, S. S., Chiou, C. C., & Luong, H. T. (2019). Application of SMED Methodology and Scheduling in High-Mix Low Volume Production Model to Reduce Set-up Time: A Case of S Company. IOP Conference Series: Materials Science and Engineering, 598(1). https://doi.org/10.1088/1757-899X/598/1/012058
Wibowo, A. D. W., & Lukmandono, L. (2021). Implementasi Metode Single Minute Exchange of Dies (SMED) dan Maynard Operation Sequence Technique (MOST) untuk Perbaikan Waktu Proses Produksi (Studi Kasus Departemen Produksi-Wrapping di PT. X Surabaya). Prosiding SENASTITAN: Seminar Nasional Teknologi Industri Berkelanjutan, 1(1), 52–60.
Yasra, R., Putri, N. T., & Rozaq, M. (2021a). Perbaikan Metode Kerja Pada Proses Set Up Untuk Meningkatkan Produktivitas Machining Gate Valve di PT Cameron System Batam. PROFISIENSI: Jurnal Program Studi Teknik Industri, 9(1), 60–73.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal KaLIBRASI - Karya Lintas Ilmu Bidang Rekayasa Arsitektur, Sipil, Industri
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
